DH30PC
| П-п | Название |
|---|---|
| 1 | FRONT CAP |
| 2 | GRIP |
| 3 | STOPPER RING |
| 4 | HOLDER SLEEVE |
| 5 | BALL HOLDER |
| 6 | HOLDER SPRING |
| 7 | SPRING HOLDER (B) |
| 8 | RETAINING RING |
| 9 | SLEEVE |
| 10 | CYLINDER CASE COVER |
| 11 | HITACHI LABEL |
| 12 | CYLINDER CASE |
| 13 | HEX. SOCKET HD. BOLT (W/FLANGE) M5X25 |
| 14 | O-RING (1AS-50) |
| 15 | OIL SEAL |
| 16 | WASHER (B) |
| 17 | DAMPER (B) |
| 18 | DAMPER WASHER (B) |
| 19 | BALL BEARING 6005T2X3CN |
| 20 | RETAINING RING FOR D47 HOLE |
| 21 | RETAINING RING FOR D30 SHAFT |
| 22 | BALL BEARING 6906T2CN |
| 23 | NEEDLE |
| 24 | RETAINER SLEEVE (B) |
| 25 | TAPPING SCREW (W/FLANGE) D4X25 (BLACK) |
| 26 | CHANGE LEVER |
| 27 | NEEDLE BEARING |
| 28 | BEARING BUSHING |
| 29 | SHIFT LEVER |
| 30 | O-RING (B) |
| 31 | PLATE SPRING |
| 32 | LOCK PLATE |
| 33 | PLATE HOLDER |
| 34 | SEAL LOCK SCREW (W/SP. WASHER) M4X6 |
| 35 | THIRD PINION |
| 36 | BALL BEARING 6901DDC3PS2-L (EC) |
| 37 | RETAINING RING FOR D24 HOLE |
| 38 | CLUTCH SPRING (B) |
| 39 | CLUTCH (B) |
| 40 | SHIFT PLATE |
| 41 | SECOND GEAR |
| 42 | SLEEVE (B) |
| 43 | BALL BEARING 608VVC2PS2L |
| 44 | SHIFT SPRING |
| 45 | SHIFT GUIDE |
| 46 | SEAL LOCK HEX. SOCKET HD. BOLT M4X10 |
| 47 | NAME PLATE |
| 48 | CRANK CASE COVER |
| 49 | O-RING |
| 50 | CRANK SHAFT |
| 51 | CRANK CASE ASS’Y INCLUD.27,28 |
| 52 | OIL SEAL (B) |
| 53 | BALL BEARING 6002VVCMPS2L |
| 54 | RETAINING RING FOR D32 HOLE |
| 55 | CLUTCH SPRING (A) |
| 56 | CLUTCH (A) |
| 57 | NEEDLE CAGE |
| 58 | FIRST GEAR |
| 59 | THRUST BALL BEARING |
| 60 | WASHER (A) |
| 61 | NEEDLE BEARING (HK0810) |
| 62 | PIN D4X12 (10 PCS.) |
| 63 | GEAR COVER |
| 64 | O-RING |
| 65 | STEEL BALL D7.0 (10 PCS.) |
| 66 | RETAINER SLEEVE (A) |
| 67 | O-RING (B) |
| 68 | SECOND HAMMER |
| 69 | HAMMER HOLDER |
| 70 | DAMPER |
| 71 | DAMPER HOLDER |
| 72 | STOPPER RING |
| 73 | WASHER (A) |
| 74 | CYLINDER |
| 75 | FEATHER KEY 3X3X15 |
| 76 | PUSHING RING |
| 77 | SPRING (A) |
| 78 | WASHER (C) |
| 79 | RETAINING RING FOR D34 SHAFT |
| 80 | STRIKER |
| 81 | O-RING |
| 82 | THIRD GEAR |
| 83 | PISTON |
| 84 | PISTON PIN |
| 85 | CONNECTING ROD ASS’Y INCLUD.86 |
| 86 | NEEDLE BEARING (NTN 8Q-HK08 10D) |
| 87 | HANDLE BOLT |
| 88 | HANDLE HOLDER |
| 89 | SIDE HANDLE |
| 90 | FELT PACKING |
| 91 | PACKING WASHER |
| 92 | BALL BEARING 6001DDCMPS2L |
| 93 | WASHER (B) |
| 94 | FAN |
| 95 | ARMATURE ASS’Y 110V-120V INCLUD.43,92-94,96 |
| 95 | ARMATURE ASS’Y 220V-230V INCLUD.94 |
| 95 | ARMATURE ASS’Y 240V INCLUD.94 |
| 96 | WASHER (A) |
| 97 | FAN GUIDE |
| 98 | HEX. HD. TAPPING SCREW D5X50 |
| 99 | STATOR ASS’Y 110V-120V INCLUD.100 |
| 99 | STATOR ASS’Y 220V-230V INCLUD.100 |
| 99 | STATOR ASS’Y 240V INCLUD.100 |
| 99 | STATOR ASS’Y 110V-120V INCLUD.100 FOR USA,CAN |
| 100 | BRUSH TERMINAL |
| 101 | HOUSING ASS’Y INCLUD.105,106 |
| 102 | HEX. SOCKET HD. BOLT (W/FLANGE) M5X35 |
| 103 | BRUSH CAP |
| 104 | CARBON BRUSH (AUTO STOP TYPE) (1 PAIR) |
| 105 | BRUSH HOLDER |
| 106 | HEX. SOCKET SET SCREW M5X8 |
| 107 | TAPPING SCREW (W/FLANGE) D4X16 (BLACK) |
| 108 | BEARING BUSHING (B) |
| 109 | TAIL COVER |
| 110 | CONNECTOR 50091 (10 PCS.) |
| 111 | INTERNAL WIRE EXCEPT FOR USA,CAN |
| 112 | MACHINE SCREW (W/WASHERS) M5X16 (BLACK) |
| 113 | HANDLE |
| 114 | TRIGGER |
| 115 | SWITCH (B) (2P PILLAR TYPE) W/O LOCK |
| 115 | SWITCH (A) (2P PILLAR TYPE) W/O LOCK FOR GBR (110V),USA,CAN |
| 116 | NOISE SUPPRESSOR EXCEPT FOR USA,CAN |
| 117 | SUPPORT (B) FOR NOISE SUPPRESSOR |
| 118 | HANDLE COVER |
| 119 | TAPPING SCREW (W/FLANGE) D4X20 (BLACK) |
| 120 | TUBE (D) FOR CORD |
| 121 | CORD CLIP |
| 122 | TAPPING SCREW (W/FLANGE) D4X16 |
| 123 | TAPPING SCREW (W/FLANGE) D5X25 (BLACK) |
| 124 | CORD ARMOR D8.8 |
| 124 | CORD ARMOR D10.1 |
| 125 | CORD (CORD ARMOR D8.8) |
| 125 | CORD (CORD ARMOR D8.8) FOR AUS |
| 125 | CORD (CORD ARMOR D10.1) FOR HKG,GBR (230V) |
| 125 | CORD (CORD ARMOR D8.8) FOR GBR (110V),SAF,YEN |
| 125 | CORD (CORD ARMOR D10.1) FOR SUI |
| 125 | CORD (CORD ARMOR D8.8) FOR USA,CAN |
| 125 | CORD (CORD ARMOR D8.8) FOR CHN |
| 126 | PLUG (A) |
| 127 | PLUG (B) |
| 127 | PLUG (B) FOR USA,CAN |
| 501 | STOPPER ROD |
| 502 | DUST CUP |
| 503 | SYRINGE (BELLOWS TYPE) |
| 504 | CASE |
| 601 | TAPER SHANK DRILL BIT D11X100 |
| 602 | TAPER SHANK DRILL BIT D12.3X110 |
| 603 | TAPER SHANK DRILL BIT D12.7X110 |
| 604 | TAPER SHANK DRILL BIT D14.3X110 |
| 605 | TAPER SHANK DRILL BIT D14.5X110 |
| 606 | TAPER SHANK DRILL BIT D17.5X120 |
| 607 | TAPER SHANK DRILL BIT D21.5X140 |
| 608 | TAPER SHANK ADAPTER (SDS PLUS) NO.1 |
| 609 | TAPER SHANK ADAPTER (SDS PLUS) NO.2 |
| 610 | A-TAPER SHANK ADAPTER (SDS PLUS) |
| 611 | B-TAPER SHANK ADAPTER (SDS PLUS) |
| 612 | COTTER |
| 613 | ANCHOR SETTING ADAPTER A (SDS+)W1/4X260L |
| 614 | ANCHOR SETTING ADAPTER A (SDS+)W5/16X260L |
| 615 | ANCHOR SETTING ADAPTER A (SDS+)W3/8X160L |
| 616 | ANCHOR SETTING ADAPTER A (SDS+)W3/8X260L |
| 617 | ANCHOR SETTING ADAPTER B (SDS+)W1/4X260L |
| 618 | ANCHOR SETTING ADAPTER B (SDS+)W5/16X260L |
| 619 | ANCHOR SETTING ADAPTER B (SDS+)W3/8X160L |
| 620 | ANCHOR SETTING ADAPTER B (SDS+)W3/8X260L |
| 621 | ANCHOR SETTING ADAPTER A W1/4\" (MANUAL) |
| 622 | ANCHOR SETTING ADAPTER A W5/16\" (MANUAL) |
| 623 | ANCHOR SETTING ADAPTER A W3/8\" (MANUAL) |
| 624 | ANCHOR SETTING ADAPTER A W1/2\" (MANUAL) |
| 625 | ANCHOR SETTING ADAPTER A W5/8\" (MANUAL) |
| 626 | ANCHOR SETTING ADAPTER B W1/4\" (MANUAL) |
| 627 | ANCHOR SETTING ADAPTER B W5/16\" (MANUAL) |
| 628 | ANCHOR SETTING ADAPTER B W3/8\" (MANUAL) |
| 629 | ANCHOR SETTING ADAPTER B W1/2\" (MANUAL) |
| 630 | ANCHOR SETTING ADAPTER B W5/8\" (MANUAL) |
| 631 | CORE BIT (A) 25MM |
| 632 | CORE BIT (A) 29MM |
| 633 | CORE BIT (A) 32MM |
| 634 | CORE BIT (A) 35MM |
| 635 | CORE BIT (A) 38MM |
| 636 | CORE BIT (B) 45MM |
| 637 | CORE BIT (B) 50MM |
| 638 | CORE BIT (B) 65MM |
| 639 | CORE BIT (B) 80MM |
| 640 | CORE BIT (B) 90MM |
| 641 | CENTER PIN (A) 109L FOR CORE BIT D32-38 |
| 642 | CENTER PIN (B) 104L FOR CORE BIT D45-90 |
| 643 | CORE BIT SHANK (SDS PLUS) 25-38MM 105L |
| 644 | CORE BIT SHANK (SDS PLUS) 25-38MM 300L |
| 645 | CORE BIT SHANK (SDS PLUS) 45-90MM 300L |
| 646 | ADAPTER (A) FOR HAMMER DRILL |
| 647 | SYRINGE (BLOW-OUT BULB TYPE) |
| 648 | BULL POINT (SDS+) 250MM (ROUND SHANK TYPE) |
| 649 | CHEMICAL ANCHOR ADAPTER (SDS+)12.7MMX90L |
| 650 | CHEMICAL ANCHOR ADAPTER (SDS+)19.0MMX100L |
| 651 | DRILL CHUCK 13VLR INCLUD.652,654 |
| 652 | CHUCK WRENCH 10G |
| 653 | DRILL CHUCK 13VLA INCLUD.652 |
| 654 | SPECIAL SCREW M6X22 |
| 655 | DUST COLLECTOR ASS’Y INCLUD.656-662 |
| 656 | DUST COVER |
| 657 | SEAL COVER |
| 658 | RETAINING RING FOR D30 SHAFT |
| 659 | WASHER |
| 660 | STEEL BALL D6.35 (10 PCS.) |
| 661 | OUTER RACE |
| 662 | SOCKET |
| 663 | DRILL CHUCK AND ADAPTER SET (SDS PLUS) INCLUD.651,654,665 |
| 664 | CHUCK ADAPTER (D) (SDS PLUS) |
| 665 | CHUCK ADAPTER (G) (SDS PLUS) |
| 666 | + DRIVER BIT (A) NO.2 25L |
| 667 | + DRIVER BIT (A) NO.3 25L |
| 668 | GREASE FOR HAMMER.HAMMER DRILL (500G) |
| 669 | GREASE FOR HAMMER.HAMMER DRILL (70G) |
| 670 | GREASE (A) FOR HAMMER.HAMMER DRILL (30G) |
| 671 | DUST COLLECTOR (FOR IMPACT DRILL C) |
| 672 | ADAPTER |
Наша компания предоставляет вам возможность самостоятельно найти схему вашего изделия и сделать по ней заказ нужной вам запчасти, которую мы постараемся найти у поставщиков и привезти её к вам Мы пришлем вам предложение с указанием сроков и цены. Цена включает в себя доставку до нашего склада в Санкт-Петербурге (15% от стоимости изделия).
Доставка до вашего адреса от нашего склада выставляется отдельным счетом. Срок бесплатного хранения на нашем складе 2 недели от даты уведомления о поступлении заказа на склад, дальше хранение платное - 1% в день от стоимости заказа.