DH40MB
| П-п | Название |
|---|---|
| 1 | FRONT CAP |
| 2 | GRIP |
| 3 | NEEDLE HOLDER |
| 4 | NEEDLE ROLLER D8X20 |
| 5 | RETAINER SLEEVE |
| 6 | 0 - RING (B) |
| 7 | 0 - RING |
| 8 | SECOND HAMMER |
| 9 | RETAINER SPRING |
| 10 | SPRING HOLDER |
| 11 | RETAINING RING D38 |
| 12 | •SLEEVE (A) |
| 13 | NYLOCK HIGH TENSION BOLT M7X25 |
| 14 | FRONT COVER |
| 15 | O-RING (IAS -60) |
| 16 | OIL SEAL |
| 17 | SLEEVE (B) |
| 18 | O - RING (A) |
| 19 | URETHANE RING |
| 20 | WASHER |
| 21 | BALL BEARING 6908DDUCM PS2 - L |
| 22 | WASHER (A) |
| 23 | SDS MAX LABEL |
| 24 | BEVEL PINION |
| 25 | FEATHER KEY 3X3XB |
| 26 | OIL SEAL (A) |
| 27 | BALL BEARING 6002DDUCMPS2S |
| 28 | WASHER |
| 29 | WASHER (A) |
| 30 | GEAR HOLDER |
| 31 | SPRING (C) |
| 32 | NEEDLE PIN D6X6 |
| 33 | SECOND GEAR |
| 34 | SPACER |
| 35 | BALL BEARING 629WMC2EPS2L |
| 36 | SLIP CLUTCH ASS Y INCLUD.24,25,27 - 35 |
| 37 | NYLOCK BOLT (W/FLANGE) M5X16 |
| 38 | DISTANCE PIECE (B) |
| 39 | CRANK CASE COVER ASSY INCLUD.38 |
| 40 | RUBBER SEAL |
| 41 | CRANK CASE |
| 42 | RETAINING RING FOR D12 SHAFT (10 PCS ) |
| 43 | CRANK SHAFT |
| 44 | FEATHER KEY 3X3X10 |
| 45 | BALL BEARING 6204WCMPS2S |
| 46 | OIL SEAL (B) |
| 47 | BEARING COVER |
| 48 | NYLOCK HEX. SOCKET HD. BOLT M5X16 |
| 49 | NEEDLE BEARING (M661) |
| 50 | FIRST GEAR |
| 51 | SEAL PACKING |
| 52 | GEAR COVER |
| 53 | DAMPER WASHER |
| 54 | DAMPER |
| 55 | DAMPER HOLDER |
| 56 | STOPPER RING |
| 57 | NEEDLE PIN D6X6 |
| 58 | FEATHER KEY 3X3X20 |
| 59 | CYLINDER |
| 60 | CLUTCH SPRING |
| 61 | LOCK SLEEVE |
| 62 | LOCK SPRING |
| 63 | STRIKER |
| 64 | O - RING |
| 65 | CLUTCH |
| 66 | PISTON |
| 67 | PISTON PIN |
| 68 | CONNECTING ROD ASSY INCLUD69 |
| 69 | NEEDLE BEARING (NSK AJ50 1203) |
| 70 | STOPPER ROD |
| 70 | I CYLINDER CASE |
| 71 | NYLOCK BOLT (W/FLANGE) M6X25 |
| 72 | O - RING (IAS - 60) |
| 73 | NEEDLE BEARING (B) (NTN HMK4520) |
| 74 | BEVEL GEAR |
| 75 | SIDE HANDLE |
| 76 | HANDLE HOLDER |
| 77 | HANDLE BOLT |
| 79 | O ЎЄ RING (P - 16) |
| 80 | LEVER SHAFT |
| 81 | UNDER COVER |
| 82 | SHAFT COVER |
| 83 | WASHER M4 (10 PCS.) |
| 84 | NYLOCK HEX. SOCKET HD. BOLT M4X12 |
| 85 | LEVER |
| 86 | SPRING |
| 87 | SLEEVE |
| 88 | NYLOCK BOLT (W/FLANGE) M5X25 |
| 89 | BALL BEARING 6202VVCMPS2S |
| 90 | DUST WASHER (B) |
| 91 | O - RING |
| 92 | FAN |
| 93 | ARMATURE ASSЎЇY (A) 220V - 230V INCLUD.92 |
| 93 | ARMATURE ASS Y (A) 110V - 115V INCLUD.89,90.92.97.98 |
| 93 | ARMATURE ASS\'Y (A) 127V INCLUD.92 |
| 93 | ARMATURE ASS Y (A) 240V INCLUD.92 |
| 94 | HEX. HD. TAPPING SCREW D5X55 |
| 95 | STATOR ASS\'Y 127V INCLUD.96 |
| 95 | STATOR ASS Y 220V - 230V INCLUD.96 |
| 95 | STATOR ASS Y 240V INCLUD.96 |
| 95 | STATOR ASS Y 220V - 230V INCLUD.96 FOR NZL.GBR.SAF.ITA.FRG.FRA. |
| 95 | STATOR ASSЎЇY 110V - 115V INCLUD.96 |
| 95 | STATOR ASS Y 115V INCLUD.96 FOR USA.CAN |
| 95 | STATOR ASS\'Y 240V INCLUD.96 FOR AUS |
| 96 | BRUSH TERMINAL |
| 97 | DUST WASHER (A) |
| 98 | BALL BEARING 629VVMC2EPS2L |
| 99 | HOUSING ASS Y INCLUD.103.104 |
| 100 | HITACHI LABEL |
| 102 | CARBON BRUSH (AUTO STOP TYPE) (1 PAIR) |
| 103 | BRUSH HOLDER |
| 104 | HEX. SOCKET SET SCREW M5X8 |
| 105 | BEARING HOLDER |
| 106 | TAIL COVER |
| 107 | TAPPING SCREW (W/FLANGE) D5X20 (BLACK) |
| 108 | HANDLE |
| 109 | SWITCH (C) (2P SCREW TYPE W/O LOCK) |
| 110 | HANDLE COVER |
| 111 | TAPPING SCREW (W/FLANGE) D4X25 (BLACK) |
| 112 | TERMINAL |
| 112 | TERMINAL M4.0 (10 PCS.) FOR USA.CAN |
| 112 | TERMINAL FOR SIN.KUW.GBR (HOV).SAF.NGU.NZL.AUS |
| 113 | CORD CLIP |
| 113 | CORD CLIP FOR SUl |
| 114 | TAPPING SCREW (W/FLANGE) D4X16 |
| 115 | CORD . (CORD ARMOR D10.7) FOR SYR |
| 115 | CORD (CORD ARMOR D10.7) |
| 115 | CORD (CORD ARMOR D8.2) FOR SUR.INA |
| 115 | CORD (CORD ARMOR D8.2) FOR SIN.KUW |
| 115 | CORD (CORD ARMOR D10.7) FOR GBR (110V) |
| 115 | CORD (CORD ARMOR D10.7) FOR GBR (230V) |
| 115 | CORD (CORD ARMOR D10.7) FOR ITA.FRG.FRA.BEL. |
| 115 | CORD (CORD ARMOR D8.2) FOR SAF |
| 115 | CORD (CORD ARMOR D8.2) FOR NGU.NZL |
| 115 | CORD (CORD ARMOR D10.7) FOR AUS |
| 115 | CORD (CORD ARMOR D10.7) FOR USA.CAN |
| 115 | CORD (CORD ARMOR D10.7) FOR SUl |
| 116 | CONNECTOR 50092 (10 PCS.) |
| 117 | DIAL FRAME |
| 118 | TAPPING SCREW (W/FLANGE) D5X25 (BLACK) |
| 119 | NAME PLATE |
| 120 | CORD ARMOR D10.7 |
| 120 | CORD ARMOR D8.2 |
| 121 | CONTROLLER CIRCUIT 115V FOR USA.CAN |
| 121 | I CONTROLLER CIRCUIT 100V - 127V |
| 121 | | CONTROLLER CIRCUIT 220V - 240V |
| 122 | : PLUG (A) |
| 122 | PLUG (A) FOR NZLAUS.GBR.SAF.ITA.FRG.FRA.BEL.HOL. |
| 122 | PLUG (A) FOR SUI |
| 123 | PLUG (B) |
| 123 | PLUG (B) FOR USA.CAN |
| 123 | PLUG (B) FOR NZL.GBR.SAF.ITA.FRG.FRA.BELHOLDEN. |
| 124 | CONNECTOR 50092 (10 PCS.) |
| 125 | PILLAR TERMINAL FOR NZl.GBR.SAF.UA.FRG.FRA.BEL.HOL.DEN. |
| 501 | CASE (PLASTIC) |
| 502 | GREASE (A) FOR HAMMER.HAMMER DRILL (30G) |
| 503 | HEX. BAR WRENCH 4MM |
| 504 | HEX. BAR WRENCH 5MM |
| 601 | DRILL BIT (SDS MAX) D16X340 |
| 602 | DRILL BIT (SDS MAX) D19X340 |
| 603 | DRILL BIT (SDS MAX) D22X320 |
| 604 | DRILL BIT (SDS MAX) D25X320 |
| 605 | DRILL BIT (SDS MAX) D28X370 |
| 606 | DRILL BIT (SDS MAX) D32X370 |
| 607 | DRILL BIT (SDS MAX) D38X370 |
| 608 | DRILL BIT (SDS MAX) D40X370 |
| 609 | DRILL BIT (SDS MAX) D16X540 |
| 610 | DRILL BIT (SDS MAX) D19X540 |
| 611 | DRILL BIT (SDS MAX) D22X520 |
| 612 | DRILL BIT (SDS MAX) D25X520 |
| 613 | DRILL BIT (SDS MAX) D28X570 |
| 614 | DRILL BIT (SDS MAX) D32X570 |
| 615 | DRILL BIT (SDS MAX) D38X570 |
| 616 | DRILL BIT (SDS MAX) D40X570 |
| 617 | TAPER SHANK DRILL BIT D11X100 |
| 618 | TAPER SHANK DRILL BIT D12.3X110 |
| 619 | TAPER SHANK DRILL BIT D12.7X110 |
| 620 | TAPER SHANK DRILL BIT D14.3X110 |
| 621 | TAPER SHANK DRILL BIT D14.5X110 |
| 622 | TAPER SHANK DRILL BIT D17.5X120 |
| 623 | TAPER SHANK ADAPTER ASSЎЇY (SDS MAX) N0.1 |
| 624 | COTTER |
| 625 | ADAPTER (SDS MAX) FOR SDS PLUS SHANK BIT |
| 626 | CORE BIT 25MM |
| 627 | CORE BIT 29MM |
| 628 | CORE BIT 32MM INCLUD.642 |
| 629 | CORE BIT 35MM INCLUD.643 |
| 630 | CORE BIT 38MM INCLUD 644 |
| 631 | CORE BIT 45MM 1NCLUD.645 |
| 632 | CORE BIT 50MM INCLUD646 |
| 633 | CORE BIT 54MM INCLUD.647 |
| 634 | CORE BIT 60MM INCLUD648 |
| 635 | CORE BIT 64MM INCLUD.649 |
| 636 | CORE BIT 70MM INCLUD.650 |
| 637 | CORE BIT 75MM INCLUD.651 |
| 638 | CORE BIT 79MM INCLUD.652 |
| 639 | CORE BIT 94MM INCLUD.653 |
| 640 | CORE BIT 100MM INCLUD.654 |
| 641 | CORE BIT 105MM INCLUD.655 |
| 642 | GUIDE PLATE (FOR CORE BIT 32MM) |
| 643 | GUIDE PLATE (FOR CORE BIT35MM) |
| 644 | GUIDE PLATE (FOR CORE BIT 38MM) |
| 645 | GUIDE PLATE (FOR CORE BIT 45MM) |
| 646 | GUIDE PLATE (FOR CORE BIT50MM) |
| 647 | GUIDE PLATE (FOR CORE BIT 54MM) |
| 648 | GUIDE PLATE (FOR CORE BIT 60MM) |
| 649 | GUIDE PLATE (FOR CORE BIT 64MM) |
| 650 | GUIDE PLATE (FOR CORE BIT70MM) |
| 651 | GUIDE PLATE (FOR CORE BIT75MM) |
| 652 | GUIDE PLATE (FOR CORE BIT79MM) |
| 653 | GUIDE PLATE (FOR CORE BIT 94MM) |
| 654 | GUIDE PLATE (FOR CORE BIT 100MMJ |
| 655 | GUIDE PLATE (FOR CORE BIT 105MM} |
| 656 | CORE BIT SET 32MM |
| 657 | CORE BIT SET 35MM |
| 658 | CORE BIT SET 38MM |
| 659 | CORE BIT SET 45MM |
| 660 | CORE BIT SET 50MM |
| 661 | CORE BIT SET 54MM |
| 662 | CORE BIT SET 60MM |
| 663 | CORE BIT SET 64MM |
| 664 | CORE BIT SET70MM |
| 665 | CORE BIT SET75MM |
| 666 | CORE BIT SET 79MM |
| 667 | CORE BIT SET 94MM |
| 668 | CORE BIT SET 100MM |
| 669 | CORE BIT SET 105MM |
| 670 | CENTER PIN (B) 147L FOR CORE BIT D32 - 35 |
| 671 | CENTER PIN (A) 133L FOR CORE BIT D38 - 150 |
| 672 | CORE BIT SHANK (B) SDS MAX |
| 673 | CORE BIT SHANK (A) SDS MAX |
| 674 | DRILL CHUCK 13VLA INCLUD.675 |
| 675 | CHUCK WRENCH 10G |
| 676 | CHUCK ADAPTER (SDS MAX) |
| 677 | CHEMICAL ANCHOR ADAPTER (SDS MAX) 12.7MM |
| 678 | CHEMICAL ANCHOR ADAPTER |
| 679 | BULL POINT (SDS MAX) 280L |
| 680 | BULL POINT (SDS MAX) 400L |
| 681 | COLD CHISEL (SDS MAX) 280MM |
| 682 | COLD CHISEL (SDS MAX) 400MM |
| 683 | CUTTER (SDS MAX) W50X400L |
| 684 | SCOOP (SDS MAX) 400L |
| 685 | BUSHING TOOL (SDDS MAX) |
| 686 | RAMMER (SDS MAX) 150MM X 150MM |
| 687 | SHANK (SDS MAXTOR RAMMER.BUSHING TOOL |
| 688 | SYRINGE |
| 689 | GREASE FOR HAMMER.HAMMER DRILL (70G) |
| 690 | GREASE FOR HAMMER.HAMMER DRILL (500G) |
| BRUSH CAP | |
| DEN.FIN.SWE.AUT.NOR.ESP.KOR | |
| FIN.SWE.AUT.NOR.ESP.SUI.CHN.KOR | |
| BEL.HOLDEN.FIN.SWE.AUT.NOR.ESP.SUI | |
| FIN.SWE.AUT.NOR.ESP.SUI.USA.CAN.CHNKOR | |
| STANDARD ACCESSORIES | |
| HOL.DEN,FIN.SWE,AUS.NOR.ESP,CHN,KOR I | |
| OPTIONAL ACCESSORIES |
Наша компания предоставляет вам возможность самостоятельно найти схему вашего изделия и сделать по ней заказ нужной вам запчасти, которую мы постараемся найти у поставщиков и привезти её к вам Мы пришлем вам предложение с указанием сроков и цены. Цена включает в себя доставку до нашего склада в Санкт-Петербурге (15% от стоимости изделия).
Доставка до вашего адреса от нашего склада выставляется отдельным счетом. Срок бесплатного хранения на нашем складе 2 недели от даты уведомления о поступлении заказа на склад, дальше хранение платное - 1% в день от стоимости заказа.