DH50MB
| П-п | Название |
|---|---|
| 1 | FRONT CAP |
| 2 | GRIP |
| 3 | STOPPER RING |
| 4 | NEEDLE HOLDER |
| 5 | RETAINER SPRING |
| 6 | SPRING HOLDER |
| 7 | NYLOCK HEX. SOCKET HD. BOLT M8X25 |
| 8 | FRONT COVER |
| 9 | O-RING (S-70) |
| 10 | OIL SEAL (NBR710) |
| 11 | URETHANE RING |
| 12 | URETHANE RING HOLDER |
| 13 | RETAINING RING D40 |
| 14 | BALL BEARING 6008CM |
| 15 | SLEEVE |
| 16 | BEVEL PINION |
| 17 | FEATHER KEY 3X3X8 |
| 18 | BALL BEARING 6202DDCMPS2L |
| 19 | WASHER |
| 20 | WASHER (A) |
| 21 | GEAR HOLDER |
| 22 | SPRING (C) |
| 23 | NEEDLE PIN D6X6 |
| 24 | SECOND GEAR |
| 25 | SPACER |
| 26 | BALL BEARING 629VVC2PS2L |
| 27 | SLIP CLUTCH ASS\'Y (INCLUD.16-26) |
| 28 | SDS-MAX LABEL |
| 29 | FEATHER KEY 5X5X15 |
| 30 | BEARING WASHER (C) |
| 31 | NYLOCK BOLT (W/FLANGE) M5X16 |
| 32 | DISTANCE PIECE (B) |
| 33 | CRANK CASE COVER ASS\'Y (INCLUD.32) |
| 34 | RUBBER SEAL |
| 35 | CRANK CASE |
| 36 | GUIDE PLATE |
| 37 | HANDLE RUBBER |
| 38 | NYLOCK HEX. SOCKET HD. BOLT M5X16 |
| 39 | RETAINING RING FOR D12 SHAFT (10 PCS.) |
| 40 | CRANK SHAFT |
| 41 | BALL BEARING 6205DDCMPS2L |
| 42 | RETAINING RING FOR D25 SHAFT |
| 43 | BEARING COVER |
| 44 | SECOND PINION |
| 45 | FIRST GEAR |
| 46 | THRUST WASHER |
| 47 | RETAINING RING FOR D17 SHAFT |
| 48 | SEAL PACKING |
| 49 | NEEDLE BEARING (M661) |
| 50 | GEAR COVER |
| 51 | NEEDLE ROLLER D8X20 |
| 52 | RETAINER SLEEVE |
| 53 | O-RING |
| 54 | SECOND HAMMER |
| 55 | DAMPER WASHER |
| 56 | DAMPER |
| 57 | DAMPER HOLDER |
| 58 | CYLINDER CASE |
| 59 | NYLOCK BOLT (W/FLANGE) M6X35 |
| 60 | NEEDLE BEARING |
| 61 | CYLINDER WASHER |
| 62 | O-RING (D) |
| 63 | NEEDLE BEARING |
| 64 | BEVEL GEAR |
| 65 | NEEDLE PIN D6X6 |
| 66 | FEATHER KEY 3X3X20 |
| 67 | CYLINDER |
| 68 | SLEEVE (A) |
| 69 | LOCK SPRING |
| 70 | LOCK SLEEVE |
| 71 | CLUTCH SPRING |
| 72 | STRIKER |
| 73 | O-RING (FPM 710) |
| 74 | CLUTCH |
| 75 | PISTON |
| 76 | CONNECTING ROD ASS\'Y (INCLUD.77) |
| 77 | NEEDLE BEARING (NSK AJ50 1203) |
| 78 | PISTON PIN |
| 79 | SIDE HANDLE |
| 80A | HANDLE HOLDER |
| 81 | HANDLE BOLT |
| 82 | STOPPER ROD |
| 83 | O-RING (P-16) |
| 84 | LEVER SHAFT |
| 85 | UNDER COVER |
| 86 | SHAFT COVER |
| 87 | HEX.SOCKET HD.BOLT (W/WASHER) M4X12 |
| 88 | LEVER |
| 89 | SPRING |
| 90 | SLEEVE |
| 91 | NYLOCK BOLT (W/FLANGE) M5X25 |
| 92 | OIL SEAL (FPM 707) |
| 93 | BALL BEARING 6203VVCMPS2L |
| 94 | SLEEVE (B) |
| 95 | DUST WASHER |
| 96 | FAN |
| 97* | ARMATURE ASS\'Y 110V-115V (INCLUD.93-96,117,118) |
| 97* | ARMATURE ASS\'Y 120V-127V (INCLUD.96) |
| 97* | ARMATURE ASS\'Y 220V-230V (INCLUD.96) |
| 97* | ARMATURE ASS\'Y 240V (INCLUD.96) |
| 98 | FAN GUIDE |
| 99 | HEX. HD. TAPPING SCREW D5X50 |
| 100* | STATOR ASS\'Y 110V-115V (INCLUD.101) |
| 100* | STATOR ASS\'Y 120V-127V (INCLUD.101) |
| 100* | STATOR ASS\'Y 220V-230V (INCLUD.101) |
| 100* | STATOR ASS\'Y 240V (INCLUD.101) |
| 100* | STATOR ASS\'Y 115V (INCLID.101 FOR USA,CAN) |
| 101 | BRUSH TERMINAL |
| 102 | HOUSING ASS\'Y (INCLUD.109,110,115,116) |
| 103 | HITACHI LABEL |
| 104 | NYLOCK BOLT (W/FLANGE) M6X40 |
| 105 | TAPPING SCREW (W/FLANGE) D4X16 (BLACK) |
| 106 | BRUSH CAP COVER |
| 107 | BRUSH CAP |
| 108 | CARBON BRUSH (AUTO STOP TYPE) (1 PAIR) |
| 109 | BRUSH HOLDER |
| 110 | HEX. SOCKET SET SCREW M5X8 |
| 111 | CONNECTOR 50092 (10 PCS.) |
| 112 | DIAL FRAME |
| 113 | NAME PLATE |
| 114 | PRISM |
| 115 | BRUSH HOLDER |
| 116 | PIECE |
| 117 | BEARING WASHER |
| 118 | BALL BEARING 6201VVCMPS2L |
| 119 | TAIL COVER |
| 120 | TAPPING SCREW (W/FLANGE) D5X16 |
| 121 | TAPPING SCREW (W/FLANGE) D5X25 (BLACK) |
| 122 | SIDE COVER ASS\'Y (INCLUD.114.123.129) |
| 123 | HANDLE PACKING (A) |
| 124 | DISTANCE PIECE (B) |
| 125 | HANDLE |
| 126 | SWITCH (C) (2P SCREW TYPE W/O LOCK) |
| 127 | HANDLE COVER |
| 128 | TAPPING SCREW (W/FLANGE) D4X20 (BLACK) |
| 129 | HANDLE PACKING (B) |
| 130* | CORD ARMOR D10.7 |
| 130* | CORD ARMOR D8.2 |
| 131* | TERMINAL |
| 131* | TERMINAL (FOR SAF,AUS) |
| 131* | TERMINAL M4.0 (10 PCS.) (FOR USA,CAN,MEX) |
| 132* | CORD CLIP |
| 132* | CORD CLIP (FOR SUI) |
| 133 | TAPPING SCREW (W/FLANGE) D4X16 |
| 134* | CORD ((CORD ARMOR D10.7)) |
| 134* | CORD ((CORD ARMOR D10.7) FOR GBR(230V)) |
| 134* | CORD ((CORD ARMOR D10.7) FOR USA,CAN,MEX) |
| 134* | CORD ((CORD ARMOR D8.2) FOR AUS) |
| 134* | CORD ((CORD ARMOR D10.7) FOR SUI) |
| 134* | CORD ((CORD ARMOR D10.7) FOR GBR(110V)) |
| 135* | CONTROLLER CIRCUIT |
| 135* | CONTROLLER CIRCUIT (FOR GBR(110V),MEX) |
| 135* | CONTROLLER CIRCUIT (FOR USA,CAN) |
| 136* | PLUG (A) (FOR USA,CAN,MEX) |
| 136* | PLUG (A) |
| 137 | CONNECTOR 50092 (10 PCS.) (FOR AUS) |
| 138* | PLUG (B) |
| 138* | PLUG (B) (FOR AUS) |
| 138* | PLUG (B) (FOR USA,CAN,MEX) |
| 139 | PILLAR TERMINAL (EXCEPT AUS) |
| 140 | PLUG HOLDER |
| 501 | CASE (PLASTIC) |
| 502 | GREASE (A) FOR HAMMER.HAMMER DRILL (30G) |
| 503 | HEX. BAR WRENCH 4MM |
| 504 | HEX. BAR WRENCH 5MM |
| 505 | HEX. BAR WRENCH 6MM |
| 601 | DRILL BIT (SDS MAX) D10.5X305 |
| 602 | DRILL BIT (SDS MAX) D12.5X305 |
| 603 | DRILL BIT (SDS MAX) D12.7X305 |
| 604 | DRILL BIT (SDS MAX) D14.3X305 |
| 605 | DRILL BIT (SDS MAX) D14.5X305 |
| 606 | DRILL BIT (SDS MAX) D16X340 |
| 607 | DRILL BIT (SDS MAX) D19X340 |
| 608 | DRILL BIT (SDS MAX) D22X320 |
| 609 | DRILL BIT (SDS MAX) D25X320 |
| 610 | DRILL BIT (SDS MAX) D28X370 |
| 611 | DRILL BIT (SDS MAX) D32X370 |
| 612 | DRILL BIT (SDS MAX) D38X370 |
| 613 | DRILL BIT (SDS MAX) D40X370 |
| 614 | DRILL BIT (SDS MAX) D16X540 |
| 615 | DRILL BIT (SDS MAX) D19X540 |
| 616 | DRILL BIT (SDS MAX) D22X520 |
| 617 | DRILL BIT (SDS MAX) D25X520 |
| 618 | DRILL BIT (SDS MAX) D28X570 |
| 619 | DRILL BIT (SDS MAX) D32X570 |
| 620 | DRILL BIT (SDS MAX) D38X570 |
| 621 | DRILL BIT (SDS MAX) D40X570 |
| 622 | TAPER SHANK DRILL BIT D11X100 |
| 623 | TAPER SHANK DRILL BIT D12.3X110 |
| 624 | TAPER SHANK DRILL BIT D12.7X110 |
| 625 | TAPER SHANK DRILL BIT D14.3X110 |
| 626 | TAPER SHANK DRILL BIT D14.5X110 |
| 627 | TAPER SHANK DRILL BIT D17.5X120 |
| 629 | COTTER |
| 630 | ADAPTER (SDS MAX) FOR SDS PLUS SHANK BIT |
| 631 | CORE BIT 25MM |
| 632 | CORE BIT 29MM |
| 633 | CORE BIT 32MM (INCLUD.651) |
| 634 | CORE BIT 35MM (INCLUD.652) |
| 635 | CORE BIT 38MM (INCLUD.653) |
| 636 | CORE BIT 45MM (INCLUD.654) |
| 637 | CORE BIT 50MM (INCLUD.655) |
| 638 | CORE BIT 54MM (INCLUD.656) |
| 639 | CORE BIT 60MM (INCLUD.657) |
| 640 | CORE BIT 64MM (INCLUD.658) |
| 641 | CORE BIT 70MM (INCLUD.659) |
| 642 | CORE BIT 75MM (INCLUD.660) |
| 643 | CORE BIT 79MM (INCLUD.661) |
| 644 | CORE BIT 94MM (INCLUD.662) |
| 645 | CORE BIT 100MM (INCLUD.663) |
| 646 | CORE BIT 105MM (INCLUD.664) |
| 647 | CORE BIT 120MM (INCLUD.665) |
| 648 | CORE BIT 150MM (INCLUD.666) |
| 649 | GUIDE PLATE (FOR CORE BIT 25MM) |
| 650 | GUIDE PLATE (FOR CORE BIT 29MM) |
| 651 | GUIDE PLATE (FOR CORE BIT 32MM) |
| 652 | GUIDE PLATE (FOR CORE BIT 35MM) |
| 653 | GUIDE PLATE (FOR CORE BIT 38MM) |
| 654 | GUIDE PLATE (FOR CORE BIT 45MM) |
| 655 | GUIDE PLATE (FOR CORE BIT 50MM) |
| 656 | GUIDE PLATE (FOR CORE BIT 54MM) |
| 657 | GUIDE PLATE (FOR CORE BIT 60MM) |
| 658 | GUIDE PLATE (FOR CORE BIT 64MM) |
| 659 | GUIDE PLATE (FOR CORE BIT 70MM) |
| 660 | GUIDE PLATE (FOR CORE BIT 75MM) |
| 661 | GUIDE PLATE (FOR CORE BIT 79MM) |
| 662 | GUIDE PLATE (FOR CORE BIT 94MM) |
| 663 | GUIDE PLATE (FOR CORE BIT 100MM) |
| 664 | GUIDE PLATE (FOR CORE BIT 105MM) |
| 665 | GUIDE PLATE (FOR CORE BIT 120MM) |
| 666 | GUIDE PLATE (FOR CORE BIT 150MM) |
| 667 | CENTER PIN FOR CORE BIT D25-29 |
| 668 | CENTER PIN (B) 147L FOR CORE BIT D32-35 |
| 669 | CENTER PIN (A) 133L FOR CORE BIT D38-150 |
| 670 | CORE BIT SHANK (B) SDS MAX D25-35 |
| 671 | CORE BIT SHANK (A) SDS MAX D38-150 |
| 672 | DRILL CHUCK 13VLD-D (INCLUD.673) |
| 673 | CHUCK WRENCH 10G |
| 674 | CHUCK ADAPTER (SDS MAX) |
| 675 | CHEMICAL ANCHOR ADAPTER (SDS MAX) 12.7MM |
| 676 | CHEMICAL ANCHOR ADAPTER (SDS MAX)19MM |
| 677 | BULL POINT (SDS MAX) 280L |
| 678 | BULL POINT (SDS MAX) 400L |
| 679 | COLD CHISEL (SDS MAX) 280MM |
| 680 | COLD CHISEL (SDS MAX) 400MM |
| 681 | CUTTER (SDS MAX) W50X400L |
| 682 | SCOOP (SDS MAX) 400L |
| 683 | BUSHING TOOL (SDS MAX) |
| 684A | RAMMER (SDS MAX) 150MM X 150MM |
| 685 | SHANK (SDS MAX)FOR RAMMER,BUSHING TOOL |
| 687 | SYRINGE (BELLOWS TYPE) |
| 688 | GREASE FOR HAMMER.HAMMER DRILL (70G) |
| 689 | GREASE FOR HAMMER.HAMMER DRILL (500G) |
| 690 | SYRINGE (BLOW-OUT BULB TYPE) |
| <strong>Принадлежности OPTIONAL</strong> \\ OPTIONAL ACCESSORIES | |
| <strong>Принадлежности STANDARD</strong> \\ STANDARD ACCESSORIES |
Наша компания предоставляет вам возможность самостоятельно найти схему вашего изделия и сделать по ней заказ нужной вам запчасти, которую мы постараемся найти у поставщиков и привезти её к вам Мы пришлем вам предложение с указанием сроков и цены. Цена включает в себя доставку до нашего склада в Санкт-Петербурге (15% от стоимости изделия).
Доставка до вашего адреса от нашего склада выставляется отдельным счетом. Срок бесплатного хранения на нашем складе 2 недели от даты уведомления о поступлении заказа на склад, дальше хранение платное - 1% в день от стоимости заказа.