M12SA
| П-п | Название |
|---|---|
| 1 | TAPPING SCREW (W/WASHER) D4X25 |
| 2 | TOP COVER (A) |
| 3 | TAPPING SCREW D4X12 |
| 4 | BEARING BUSHING |
| 5 | BALL BEARING 6200VVCMPS2L |
| 6 | HEX. SOCKET SET SCREW M5X8 |
| 7 | TAPPING SCREW (W/WASHER) D4X16 |
| 8 | KNOB PINION |
| 9 | WING BOLT M6X27 |
| 10 | FRONT COVER |
| 11 | SCALE (MM) |
| 11 | SCALE (INCH) |
| 12 | SCALE STOPPER |
| 13A | HITACHI LABEL |
| 14 | STATOR ASS\'Y 110V-115V INCLUD.31 |
| 14 | STATOR ASS\'Y 127V INCLUD.31 |
| 14 | STATOR ASS\'Y 220V-230V INCLUD.31 |
| 14 | STATOR ASS\'Y 230V-240V INCLUD.31 FOR AUS,KUW,FIJ,NGU |
| 14 | STATOR ASS\'Y 220V-230V INCLUD.31 FOR NZL,ITA,FRG,HOL,DEN,ESP,GBR |
| 14 | STATOR ASS\'Y 220V-230V INCLUD.31 FOR SAF,SWE,AUT,NOR |
| 14 | STATOR ASS\'Y 110V INCLUD.31 FOR GBR |
| 14 | STATOR ASS\'Y 100V INCLUD.31 FOR KOR |
| 15 | HEX. HD. TAPPING SCREW D5X70 |
| 16 | ARMATURE 127V |
| 16 | ARMATURE 220V-230V |
| 16 | ARMATURE 240V |
| 16A | ARMATURE ASS\'Y 110V-115V INCLUD.5,49 |
| 17 | TERMINAL FOR NOISE SUPPRESSOR |
| 18 | TUBE (D) FOR NOISE SUPPRESSOR |
| 19 | NOISE SUPPRESSOR |
| 20 | TUBE (D) FOR CORD |
| 21 | CORD CLIP |
| 22 | TAPPING SCREW (W/FLANGE) D4X16 |
| 23 | CORD ARMOR D8.8 |
| 23 | CORD ARMOR D10.1 |
| 24 | CORD (CORD ARMOR D10.1) |
| 24 | CORD (CORD ARMOR D10.1) FOR SWE,NOR |
| 24 | CORD (CORD ARMOR D10.1) FOR SUI |
| 24 | CORD (CORD ARMOR D8.8) FOR ITA,FRG,HOL,DEN,AUT,INA,SUR,FRA,GRE |
| 24 | CORD (CORD ARMOR D10.1) FOR USA,CAN |
| 24 | CORD (CORD ARMOR D8.8) FOR NGU,NZL,FIG,AUS |
| 24 | CORD (CORD ARMOR D8.8) FOR SAF |
| 24 | CORD (CORD ARMOR D10.1) FOR GBR (110V) |
| 24 | CORD (CORD ARMOR D8.8) FOR SAU,SIN,KUW |
| 24 | CORD (CORD ARMOR D10.1) FOR KOR |
| 24A | CORD (CORD ARMOR D8.8) FOR GBR (240V) |
| 24A | CORD (CORD ARMOR D8.8) FOR SYR |
| 25 | SWITCH (2P PILLAR TYPE) W/O LOCK |
| 26 | BRUSH HOLDER |
| 26 | BRUSH HOLDER FOR AUT |
| 27 | CARBON BRUSH (1 PAIR) |
| 28 | BRUSH CAP |
| 28 | BRUSH CAP FOR AUT |
| 29 | NAME PLATE |
| 30A | HOUSING ASS\'Y INCLUD.6,26,64 |
| 30A | HOUSING ASS\'Y INCLUD.6,26,64 FOR AUT |
| 31 | BRUSH TERMINAL |
| 32 | LEVER |
| 33 | MACHINE SCREW (W/WASHERS) M5X25 |
| 34 | HANDLE |
| 35 | STOPPER PIECE |
| 36 | STOPPER POLE |
| 38 | WING BOLT M6X15 |
| 39A | END BRACKET (A) |
| 40A | TAPPING SCREW D5X50 |
| 41 | SELF TAPPING SCREW (W/WASHER) D4X12 |
| 42 | SPRING (A) |
| 43A | STOPPER BLOCK |
| 44 | NUT M5 (BLACK) |
| 45 | MACHINE SCREW M5X20 (BLACK) |
| 46 | MACHINE SCREW M5X35 (BLACK) |
| 47 | SEAL LOCK FLAT HD. SCREW M4X10 |
| 48 | BEARING COVER |
| 49 | BALL BEARING 6201VVCMPS2L |
| 50 | LOCK PIECE |
| 51 | RETAINING RING (E-TYPE) FOR D10 SHAFT |
| 52 | LOCK SCREW |
| 53 | WAVE WASHER |
| 54 | LOCK LEVER |
| 55 | SPRING |
| 56 | LOCK PLATE |
| 57 | SCREW M8 |
| 58 | COLLET CHUCK 1/2\" |
| 58A | COLLET CHUCK 12MM |
| 59A | BASE (TILL 9.1999 EXCEPT FOR USA,CAN) |
| 59B | BASE (SINCE 10.1999 EXCEPT FOR USA,CAN) |
| 60 | SUB BASE |
| 61 | SEAL LOCK FLAT HD. SCREW M5X14 |
| 62 | SPRING |
| 63 | SPRING |
| 64 | SPRING GUIDE |
| 65 | BELLOWS (A) (SINCE 10.1999 EXCEPT FOR USA,CAN) |
| 501 | WRENCH 21MM |
| 502 | MACHINE SCREW M5X6 (10 PCS.) |
| 503 | BAR HOLDER EXCEPT FOR FRA,SUI,GBR,CAN,HOL |
| 504 | WING BOLT M6X10 (10 PCS.) EXCEPT FOR FRA,SUI,GBR,CAN,HOL |
| 505 | FEED SCREW EXCEPT FOR FRA,SUI,GBR,CAN,HOL |
| 506 | STRAIGHT GUIDE EXCEPT FOR FRA,SUI,GBR,CAN,HOL |
| 506 | STRAIGHT GUIDE (A) ASS\'Y INCLUD.507-514 FOR FRA,SUI,GBR,HOL |
| 507 | GUIDE BAR FOR FRA,SUI,GBR,HOL |
| 508 | RETAINING RING (E-TYPE) FOR D5 SHAFT FOR FRA,SUI,GBR,HOL |
| 509 | STRAIGHT GUIDE (A) FOR FRA,SUI,GBR,HOL |
| 510 | KNOB BOLT M6X7 FOR FRA,SUI,GBR,HOL |
| 511 | SCREW HOLDER FOR FRA,SUI,GBR,HOL |
| 512 | FEED SCREW (A) FOR FRA,SUI,GBR,HOL |
| 513 | KNOB BOLT M6X17 FOR FRA,SUI,GBR,HOL |
| 514 | LOCK SPRING FOR FRA,SUI,GBR,HOL |
| 515 | TEMPLATE GUIDE D18 |
| 516 | TEMPLATE GUIDE ADAPTER |
| 517 | LOCK SPRING |
| 518 | CHUCK SLEEVE 12X6 |
| 518 | CHUCK SLEEVE 12X8 |
| 518 | CHUCK SLEEVE 12X3/8\" |
| 518 | CHUCK SLEEVE 1/2\"X1/4\" |
| 518 | CHUCK SLEEVE 1/2\"X3/8\" |
| 518 | CHUCK SLEEVE 12X10 FOR FRA |
| 518 | CHUCK SLEEVE 12X1/4\" FOR FRA |
| 519A | STRAIGHT BIT (TCT) D1/2\"X1/2\" FOR COLLET CHUCK 1/2\" |
| 519A | STRAIGHT BIT (TCT) D8X8 |
| 520 | WING BOLT M6X15 |
| 521 | ADJUSTING KNOB SET INCLUD.522-525 FOR FRG,BEL,AUS,NZL |
| 522 | SQUARE NUT |
| 523 | SLEEVE |
| 524 | WASHER (B) |
| 525 | SPRING (A) |
| 526 | DUST COLLECTION ADAPTER SET INCLUD.527,528 FOR FRG,BEL,ESP,ITA |
| 527 | KNOB NUT |
| 528 | MACHINE SCREW M5X12 (10 PCS.) |
Наша компания предоставляет вам возможность самостоятельно найти схему вашего изделия и сделать по ней заказ нужной вам запчасти, которую мы постараемся найти у поставщиков и привезти её к вам Мы пришлем вам предложение с указанием сроков и цены. Цена включает в себя доставку до нашего склада в Санкт-Петербурге (15% от стоимости изделия).
Доставка до вашего адреса от нашего склада выставляется отдельным счетом. Срок бесплатного хранения на нашем складе 2 недели от даты уведомления о поступлении заказа на склад, дальше хранение платное - 1% в день от стоимости заказа.