Главная/
Каталог/
M/
MTD/
Инструменты/
Уборочное оборудование/
Снегоуборщики бензиновые/
31AS6BEE700 (2005г.)/
General Assembly 6BE
General Assembly 6BE
| П-п | Название |
|---|---|
| 1 | Clean Out Tool replaces 731-2643) |
| 2 | Impeller Assembly, 12\" Diameter replaces 684-04057) |
| 3 | Hex Screw, 3/8-16, 1.75, Gr5, Std |
| 4 | Bolt, Carriage, 5/16-18, .750 Gr1 |
| 5 | Screw, Carriage, 1/4-20, .75, Gr5 |
| 6 | Screw, Self-tapping, 5/16-12, 0.750 |
| 6 | Chute, Keeper Flange replaces 731-04869) |
| 7 | Nut, Flange Lock, 5/16-18, Grf, Nylon |
| 8 | Nut, Flange Lock, 1/4-20, Grf, Nylon |
| 9 | Nut, Flange Lock, 3/8-16, Grf, Nylon |
| 10 | Internal Cotter Pin replaces 714-0149B) |
| 11 | Cable, Tie, 3/16 x .05 x 7.4 |
| 12 | Nut, Push-on, .25 Diameter replaces 726-04012) |
| 13 | Chute, Adapter 5\" Diameter replaces 731-04705) |
| 14 | Spring, Extension, .38 OD x 3.6 replaces 732-0611) |
| 15 | Washer, Wave, .625 x.885 x.015 |
| 16 | Mount, Clean Out Tool |
| 17 | Screw, Shoulder, .498 x .340, 3/8-16 |
| 18 | Screw, Shoulder, .625 x .170, 3/8-16 replaces 738-0281) |
| 19 | Pin, Shear, .25 x 1.50, Gr2 replaces 738-04124) |
| 20 | Bearing, Hex Flange x .75 ID replaces 741-0245) |
| 21 | Bearing, Ball, .75 ID x 1.85 OD replaces 741-0309) |
| 22 | Idler Pulley, Flat 2.75 OD replaces 756-0981A) |
| 23 | Housing, Bearing, 1.85 ID replaces 790-00075) |
| 24 | Bracket, Auger Idler w/ Brake replaces 790-00080) |
| 25 | Gearbox Assembly, Auger, 22\" replaces 618-04170) |
| 25 | Gearbox Assembly, Auger, 24\" replaces 618-04171) |
| 25 | Gearbox Assembly, Auger, 26\" replaces 618-04172) |
| 25 | Gearbox Assembly, Auger, 28\" replaces 618-04173) |
| 25 | Gearbox Assembly, Auger, 30\" replaces 618-04165) |
| 26 | Housing Assembly, Auger 22\" |
| 26 | Alternative for 684-04067: Housing Assembly, Auger 22\" |
| 27 | Spiral Assembly, LH replaces 684-04107) |
| 28 | Spiral Assembly, RH |
| 28 | Alternative for 684-04108: Spiral Assembly, RH |
| 28 | Alternative for 684-04108-4044: Spiral Assembly, RH |
| 29 | Cotter Pin, Bow-Tie |
| 30 | Spacer, 1.25 OD x .75 ID x 1.00 |
| 31 | Washer, Flat, .76 x 1.49 x .06 |
| 32 | Shear Pin, .25 x 1.50, Gr2 replaces 738-04124) |
| 33 | Bushing, Flange, .800 ID x .910 OD replaces 741-0493A) |
| 34 | Housing, Bearing, 1\" Hex replaces 790-00087) |
| 35 | Plate, Shave, 2.25 x 21.66 |
| 35 | Alternative for 790-00117: Plate, Shave, 2.25 x 21.66 |
| 35 | Alternative for 790-00117-0637: Plate, Shave, 2.25 x 21.66 |
| 35 | Alternative for 790-00117-0637: Plate, Shave, 2.25 x 21.66 |
| 35 | Alternative for 790-00118-0638: Plate, Shave, 2.25 x 27.66 |
| 36 | Bolt, Carriage, 5/16-18, 1.0 |
| 37 | Knob Assembly |
| 38 | Chute, Upper, w/ Domestic Label |
| 39 | Chute, Keeper Flange replaces 731-04869) |
| 40 | Chute, Lower, 5.0 Diameter replaces 731-04912) |
| 41 | Washer.349 ID x .879 OD x .063 replaces 736-0159) |
| 42 | Bushing, Plastic, .380 replaces 741-0475) |
| 43 | Bracket, Chute Crank |
| 43 | Alternative for 784-5647: Bracket, Chute Crank |
| 44 | Shoe, Slide |
| 44 | Alternative for 784-5580: Shoe, Slide |
| 44 | Alternative for 784-5580-0729: Shoe, Slide |
| 45 | Housing, Auger, RH Reduced replaces 719-0319) |
| 46 | Housing, Auger, LH Reduced replaces 719-0320) |
| 47 | Seal, Oil, .750 ID replaces 721-0179) |
| 48 | Bearing, Flange, .75 ID x 1.00 OD x .59 |
| 49 | Screw, Self-tapping, 1/4-20, 0.750 |
| 50 | Axle, Auger, 22\" replaces 711-04286) |
| 50 | Axle, Auger, 24\" replaces 711-04285) |
| 50 | Axle, Auger, 26\" replaces 711-04284) |
| 50 | Axle, Auger, 28\" replaces 711-04283) |
| 50 | Axle, Auger, 30\" replaces 711-04282) |
| 51 | Key, Hi-pro 3/16 x 5/8 replaces 714-0161) |
| 52 | Pin, Dowel, .25 OD x 1.2 |
| 53 | Shaft, Worm .75 OD replaces 717-04126) |
| 54 | Gear, Worm 20T replaces 717-0528A) |
| 55 | Collar, Thrust |
| 56 | Plug, 1/4 x .437 |
| 57 | Seal, Oil, .75 x 1 x .131 |
| 58 | Washer, Flat, .760 ID x 1.5 OD replaces 736-0351) |
| 59 | Washer, Flat, .51 x 1.12 |
| 60 | Bearing, Flange, .75 ID x 1.00 OD x .925 |
| 61 | Auger Clutch Cable, 44.75\" replaces 746-0897) |
| 62 | Bearing, Flange, .75 ID x 1.00 OD x .975 replaces 741-0661A) |
| 63 | Bolt, Carriage, 5/16-18, 1.0 Gr1 |
Наша компания предоставляет вам возможность самостоятельно найти схему вашего изделия и сделать по ней заказ нужной вам запчасти, которую мы постараемся найти у поставщиков и привезти её к вам Мы пришлем вам предложение с указанием сроков и цены. Цена включает в себя доставку до нашего склада в Санкт-Петербурге (15% от стоимости изделия).
Доставка до вашего адреса от нашего склада выставляется отдельным счетом. Срок бесплатного хранения на нашем складе 2 недели от даты уведомления о поступлении заказа на склад, дальше хранение платное - 1% в день от стоимости заказа.